busfan4022 Posted April 16, 2006 Report Share Posted April 16, 2006 As everyone knows there are problems with the back door and the frame,etc. Maybe someone knows about this. As i rode bus number7535 there was something wrong. The destination sign was almost unreadable! I read:_______cal*blinked*_________age(dont get confused it didnt do this: :::::::cal*blinked*:::::::::age). It had a paper sign but it said "Jeffery Express". The automated annocement(exterior) said "15, Jeffery Local". Since was going to 103st garage that would explain the "age" on the sign. The reason i wrote the thread is because i thought CTA has fixed all the NABI's problems. Or was this just a minor defect? Quote Link to comment Share on other sites More sharing options...
MetroShadow Posted April 16, 2006 Report Share Posted April 16, 2006 Destination Signs are usually normal wear and tear, this is normal for the most part. The CTA usually would have them fixed (we hope) in due time... Quote Link to comment Share on other sites More sharing options...
Busjack Posted April 16, 2006 Report Share Posted April 16, 2006 Also, this wouldn't necessarily be a problem caused by NABI, but probably Luminator (manufacturer of the sign and its controller). Since the audio was correct, I would tend to blame Luminator and not the Clever Devices controller that sets the Luminator one. It looks like several of the panels that make up the Luminator sign broke, and only the last panel was working. My question would be why CTA bought about 300 of them to retrofit the 6000s if the ones on the 7500s aren't working? Bring back TwinVision or Aesys. I think I remember one on 147 that had only 1/3 of its side sign working. Quote Link to comment Share on other sites More sharing options...
busfan4022 Posted April 16, 2006 Author Report Share Posted April 16, 2006 The Novas have them,but when they malfunction, there destination sign is blocks. What causes this? Quote Link to comment Share on other sites More sharing options...
busfan4022 Posted May 28, 2006 Author Report Share Posted May 28, 2006 Today i seen us number 6093 with the same thing listed above, it is installed with the new destination sign also. Is it the way that the destination sign is installed? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.